Being able to use the LokProgrammer you need a software for your computer. This software is steadily advanced, so stay 'up-to-date' and get the latest version of it. The software was developped for Microsoft Windows (Windows XP, 7, 8, 8.1, 10). We cannot grant a proper function in combination with former Windows systems.
LokProgrammer
Nov 17, 2018 Ce tuto aura pour but de vous guider dans l'utilisation de votre tout nouveau JR-Programmer: Installation des pilotes du JR-Programmer. I have no plans to del downloaad web portal regularly to get used to hand write inputs using your finger. Kb archive was added on 1. You can read more on how to backup drivers in Windows. Drivers Jr Programmer V2 Driver. 1/31/2018by admin. Also includes speed enhancementsminutes faster than jrp v1. Xecuter liteon dg 16d4s unlocked stalation j r programmeur v2. The j r programmer uses an updated driver set that is also used by the xecuter. This tutorial will guide you on how to install the device drivers for usbasp programmer for windows 7 or vista notethis. To easily install USB Driver (without requiring windows signature check) on Windows 10, and Windows 8 you can use Zadig tool. The detailed procedure can be seen here; Also buy AVR-ISP 10Pin to 6pin Adapter PCB (Not included with USBASP V2.0 programmer) Package including. 1x USB ISP Programmer V2.0 (with over-current protection) 10 -way ribbon cable.
Jr Programmer Drivers Download
LokProgrammer PC-Software for all LokSound 5, LokPilot 5, LokSound V4.0 and older Decoders.
Language: , Date: 29.04.21, Version: 5.1.3. Ahnlab mobile security.
Microsoft .NET Framework 3.5 SP1 is required. The .NET Framework will be installed automatically if the computer is connected to the internet.Supported decoders
LokSound- LokSound 5
- LokSound 5 MKL
- LokSound 5 micro
- LokSound 5 L
- LokSound 5 XL
- LokSound 5 DCC
- LokSound 5 micro DCC
- LokSound 5 micro DCC Direct
- LokSound 5 L DCC
- LokSound 5 micro E24 DCC
- LokSound 5 micro KATO
- LokSound 5 Fx
- LokSound V4.0
- LokSound V4.0 M4
- LokSound V4.0 M4 OEM
- LokSound micro V4.0
- LokSound XL V4.0
- LokSound L V4.0
- LokSound Select
- LokSound Select direct / micro
- LokSound Select OEM
- LokSound Select L
- LokSound V3.5
- LokSound XL V3.5
- LokSound V3.0 M4
- LokSound micro V3.5
- LokPilot 5
- LokPilot 5 DCC
- LokPilot 5 micro
- LokPilot 5 micro DCC
- LokPilot 5 L
- LokPilot 5 L DCC
- LokPilot 5 Fx
- LokPilot 5 Fx DCC
- LokPilot V4.0
- LokPilot V4.0 DCC
- LokPilot V4.0 PX
- LokPilot V4.0 M4
- LokPilot micro V4.0
- LokPilot micro V4.0 DCC
- LokPilot XL V4.0
- LokPilot Fx V4.0
- LokPilot Standard V1.0
- LokPilot Nano Standard V1.0
- LokPilot Fx Nano V1.0
- LokPilot V3.0
- LokPilot V3.0 DCC
- LokPilot V3.0 M4
- LokPilot V3.0 OEM
- LokPilot micro V3.0
- LokPilot micro V3.0 DCC
- LokPilot XL V3.0
- LokPilot Fx V3.0
- LokPilot Fx micro V3.0
- LokPilot Basic
- LokPilot Basic (LA)
- SwitchPilot 3
- SwitchPilot 3 Plus
- SwitchPilot 3 Servo
- SwitchPilot
- SwitchPilot Servo
- SwitchPilot Servo (MA)
- SwitchPilot Servo (2013)
- SwitchPilot V2.0
- SwitchPilot Servo V2.0
- SignalPilot
- Essential Sound Unit
- Test coach EHG388
- Smoke Unit (Gauge 0, G)
- KM1 Smoke Unit
- ESU digital interior light
- MBW 'Silberling' digital Interior light
- Walthers ML8
- Zeitgeist Models Zugspitzbahn Waggon
- Pullmann n-Car 'Silberling'
5.1.3.
- New Firmware 5.4.135 for LokSound 5 and LokPilot 5 family: New lighting effect Servo Steam engine Johnson bar control. Bugfix for LokSound 5 L and LokSound 5 XL decoders: AUX15-AUX18 now can be any other light effect than Servo (before it was just servo output, now can be any logic level output if servo is not needed).
- New Firmware 1.0.6. for SignalPilot: Added global flash frequency so that all leds of one signal can flash together (in synch). This is needed for example for belgian signals.
- SignalPilot editing: If you add an additional signal, the turnout number is following the highest turnout number used so far. Also, if you edit the first turnout number of an signal, all other turnout numbers of the very same signal are adjusted, too. We also added numerous new signals.
5.1.2.
- New Firmware 5.4.132 füo LokSound, und LokPilot 5 Family: Improved slowing down when constant brake mode is enabled. ABC break mode trackvoltage threshhold reduced.
- Motor settings- Presets for Softdrive C-Sinus Motor for LokSound 5 => CV 53 = 255.
- SignalPilot: New Firmware 1.0.5: Turnout numbers from 253 working now. Added new signal aspects for SBB, ÖBB, SNCF, SNCB.
- Write decoder data / Write Sounddata : Added new notification settings in the Program settings to allow notification prior to firmware update.
- Bugfixes: SwitchPilot 2 Servo have been detected as SwitchPilot 3 sometimes. SwitchPilot 3 Family: Current threshold of acknowledge increased => better CV reading accuracy.
5.1.1.
- Support for LokSound 5 Fx, LokPilot 5 Fx, LokPilot 5 Fx DCC, SwitchPilot 3, SwitchPilot 3 Plus, SwitchPilot 3 Servo. New Firmware 5.4.130 for LokSound and LokPilot 5 family: New light effect '16 2/3 Hz Flickering'
5.1.0.
- New firmware 5.3.128 for LokSound 5 and LokPilot 5 decoders: new implemented, improved AC- and DC-Analogmode. Support for SignalPilot (initial release). Bugfix: Soundsimulator no longer crashes if sound schedule is incorrectly. Comments are now also copied to and from Templates
5.0.17.
- New firmware 5.3.126 for LokSound 5 and LokPilot 5 decoders: Fixes Servo issues in combination with ROCO Multimouse systems.
5.0.16.
- New TLS Version so that automatic update will work again from now on. New warning messages if output configuration is wrong. New Firmware 5.3.125 for LokSound 5 and LokPilot 5 Familie: F16-F31 will now also follow RCN212, Section 2.3.7. Significantly improved Analog AC and DC motor control: Much better and smoother running on older motors.
5.0.14.
- Firmware 5.3.122 for LokSound 5 and LokPilot 5 Familie: New light output mode: Digitl coupler Coil#2. Ditch Light type1 now has fade-in and fade-out. Added CV 122 Bit 3 to double the amount of steam chuffs when shunting mode is active. Load dependend sound: The sound schedule's acceleratin is now immediately following 'Optinal / Primary Load'. Bugfix: Output mode 'Fliashing light' did not work properly with Grade crossing. Bugfix: Using Motorola Programming mode, now the correct outputs are flashing. Bugfix: Fixed SUSI-Problem with Brawa locomotives.
5.0.13.
- Firmware 5.3.115 for LokSound 5 and LokPilot 5 family: Fixed bug with grde crossing and flash lights. In Motorola programming, the right function outputs flashing now. Fixed scaleing bug of LokProgrammer Software.
5.0.12.
- Firmware 5.3.113 for LokSound 5 and LokPilot 5 family: Motor current limit added. Special Options - Save function state added. Improved ABC brake section detection. Sound schedule: More transistions per each state. Load simulation: Acceleration and Speed in Soundschedule now follow CV3, CV4 values. New flag 'Speed ignores speedtable' in sound schedule
5.0.11.
- Support for LokPilot 5 family
- LokSound 5: fixed Soundcompiler Bug with or-conditions.
- Firmware 5.1.105 for LokSound 5 and LokPilot 5 family: ZIMO ZACK train numbers.
5.0.10.
- Sound editor: Copy&Paste Bug for logic functions fixed.
- Firmware 5.1.103 for LokSound 5 Family: Fixed a Bug in random functions in soundslots. New CV 245 adds waiting time for automatic coupler sequence
5.0.9.
- Soundsimulator - Actions => Reset Bits of Registers.
- Read and write Decoder data: Optimisation for faster decoder detection.
- Soundeditor: Default Size for Mute and Containers are changed
- Firmware 5.1.101 for LokSound 5 Family: Soundslot Settings: Volume for each soundslot now up to 255 (instead of 128) for more volume. New audio quality 7.812 kHz / 8 Bits. Modified SUSI Support for Brawa locomotives. New light function Brake light: Light will automatically turn on while braking. Optimization for ZIMO HLU operation using Stein and MX9: More reliable detection. RailComPlus and M4 Master Decoder Synchronisation. BEMF: CV116 can have lower values down to 25 now for better control during slow speed. Small jump when stopping eliminated.
5.0.8.
- Read Decoderdata: Values for Servooutput Position B was not shown correctly sometimes.
- Soundeditor: Double comment after opening a Multichannel Steam engine removed. Paste (Ctrl-V) improved performance. New Register 'Current Speed' can be used in sound charts.
- Firmware 5.1.85 for LokSound 5 family: Now you can enable F0, F1 - F30 for control in consist mode. F0 directional also (like NMRA). SUSI exended. Now you can also select SUSI Slave to control LokSound Decoders externally.
5.0.7
- New Firmware 5.0.78 for LoKSound 5 Decoders: Optimized motor control (more silent). Fixed bug when controlling Gauge 1 smoke units (KM-1, Kiss)
5.0.6
- Improved stability when writing LokSound 5 sound data
- New menu Tools - LokProgrammer Device shows the hardware revision of the LokProgrammer used
- New firmware 5.0.73 for LokSound 5 decoders: Now automatic detection with Märklin Central Station 3 and 32 functions works again. Registration on Mobile Station 1 works again. Drivestop available in Soundslot 1 and Soundslot 2 now
5.0.5
- New Firmware 5.0.71 for LokSound 5 decoders: New light effect 'Servo Power Control'. Bugfix: Constant brake distance did not work on speedstep 0. CV 23 and CV 24 adjustment did not work correctly.
- Sound simulator: Sometimes did not reproduce 'immediate/cross' transitions.
- Sound simulator: Did hang sometimes on low performance computers. Fixed
- Bugbix: When replacing sound files sometimes the volume settings were lost.
5.0.4
- new firmware 5.0.67 for LokSound 5 Family: Soundslot 1 and Soundslot 2 determine if the driving sound is on for Random sounds. LokSound 5 DCC Decoders now get back the 3-point speed control using CV 2, CV 6 and CV 6.
- LokSound 5 family: Sound compiler sometimes left a state without sound sample too early occasionally.
5.0.3
- New Firmware 5.0.65 for LokSound 5 family: Fixed issue with Motorola address 2-4. Fixed SUSI idle level.
- LokSound 5 Family: Improved Sound compiler: Code size reduction
- Decoder 'Measurement car EHG388 M4': Default values added.
5.0.2
- Fixed a but that ScaleTrains locomotives with LokSound 5 DCC have been reported as 'restricted'.
- New Firmware 5.0.63 for LokSound 5 decoders: Added CV 135 to define the fade-in and fade-out time for the soundfader.
- Added CV 23 and CV 24 (Acceleration and Deceleration adjustment) for NCE systems.
- Fixed a bug that the brightness of function outputs is not correct after conversion from V4. Please reopen your V5 files and check the brightness of all function outputs if ok now!
5.0.1
- New Firmware 5.0.60 for LokSound 5 decoders: Brake function 1-3 new settings. CV 113 time doubled. New logical function 'Acceleration/Deceleration off'. Added CV 255.
5.0.0
- Support for the LokSound 5 Decoder family. Converter for conversion from LokSound 4 to LokSound 5 Decoders. See support pages for more details on these features.
- Multiple bug fixes in the sound editor
- Notification sound: If enabled, a sound can be played to indicate completion of sound writing.
- Sound simulator: Timer accuracy increased
- Virtual Drivers cab: New function buttons F29 to F32. Colours changed to better show the enabled functions.
- Refer to the release notes that is included in the zip-file for more details.
4.7.2
- Added new firmware 4.17.9249 for all LokSound V4 decoders. Now, if CV 245,Bit 5 is enabled, the steam chuff trigger pulses would be cut into half if Shunting mode is active and the external sensor is used
- Several bugfixes
- Graphical user interface updated for Essential Sound Unit's random functions
4.7.1
- Support for Essential Sound Unit - Changing of CVs and Firmware update 5-0-18 to fix some Consisting issues
- LokSound V4 - Steam (multi-channel), trigger condition not available for existing projects (depending on sound schedule).
- LokSound V4 - State properties -> combo box preset is not displayed with ESU Smoke Unit.
- LokSound V4 - Sound schedules with state transitions without destination can not be saved.
- Soundeditor - Transition settings - condition true / false value default value true.
4.7.0
- LokSound V3.5 family - Soundslot can not be assigned in function mapping.
- LokSound V3 - changed Soundslot name is not displayed or updated in combo box (sounds).
- LokPilot Basic, SwitchPilot - manual CV input is missing.
- LokSound V4 - writing the sound data from an imported LokSound V3 project is not possible.
- LokPilot V3.0 DCC - can not open or import .esu files.
- LokSound V4 - when converting to an M4 project, the checked checkboxes of the Moment column will not be applied.
- LokPilot Nano Standard V1 - writing decoder data is not possible.
- LokSound V4 / LokPilot V4 - writing decoder data with project convert and firmware update is not possible.
- LokSound XL V4.0 - wrong mapping of Soundslots when importing a .esu project.
- After deleting a Soundslot the Soundslot name is not updated in 'Soundslot settings' and combo box (Sounds).
- After import a template the Soundslot name is not updated in 'Soundslot settings' and combo box (Sounds).
- After changing the sound type, a NullReferenceException could occur when editing a state in the sound schedule.
- New Firmware Version 4.16.9248 for LokSound Micro V4, LokSound Select direct / micro:
- Bugfix in SUSI-Support
4.6.2
- New Decoder: Walthers ML8
- New Firmware 4.16.9247 for all LokSound V4 , LokPilot V4 and LokSound Select decoders: New CV 179 determines the dceleration value that is used whn the logical function 'Dynamic Brake' is active. This allows for real braking of the locomotive now
- New Firmware 1.2.1415 for LokPilot Standard and LokPilot Nano: Bugfix: CV 4 was not followed when the 'Virtual Drive Sound' was active
4.6.1
- General bugfix release
4.6.0
- New design for Sound simulator. Displays additional internal information during simulation
4.5.3
- New Firmware for LokSound V4, LokPilot V4: 4.15.9246, LokPilot Standard: 1.2.1408 and Digital Interior Lighting: 1.0.1461.
- Consist control command via broadcast.
- 'Drive Hold' function for LokPilot decoders.
- Fixed invalid display of LokSound V3.5 sound slots in the function mapping.
- Support for Bachmann MK2F.
- Soundslot preview did not work for all sound slots on LokSound Select.
- Fixed display issues when using custom scaling / large font.
- Fixed sound write issues with newer LokSound V4.0 decoders.
4.5.2
- Manual CV Input has been showed on decoders without CVs.
- Some LokSound V3.0 M4 files opened conversion dialog instead of loading the project.
- Firmware Version 1.0.1460 for MBW Silberling.
- Disable virtual driver's cab and read write CVs during programming.
- Name of sound slot 2 has not shown correctly oon LokSound Select steam projects.
- Fixed keyboard shortcut behavior of momentary functions in the virtual drivers cab.
- LokPilot Nano FX firmware 1.2.1407: Support for Motorola protocol.
- Club car WGye Firmware 4.15.9243: Save current volume.
- Adjusted bulletin formatting for long description text.
4.5.1
- Output mode Roco coupler was missing on LokPilot V4.0 DCC.
- Firmware Version 1.2.1405 for LokPilot Standard Nano and LokPilot Standard Nano Fx.
4.5.0
- Virtual command station uses momentary function settings from the current project.
- Added sound selection CV to sound slot settings.
- Fixed sound slot previrew for LokSound Select.
- Added snap to grid function to sound schedule editor.
- Added comments to sound schedule editor.
- Start- and end state size is now changable.
- Paste in sound schedule is now aware of the current scroll position.
- Added flash size to extended decoder information.
- Could not open .esux files of non-updateable decoders.
- LokSound Firmware 4.15.9240: Added Heavy Load and Coast mode.
4.4.24
- Improved sound slot and phyisical output configuration user interface.
- Display function icons of the current project to virtual command station.
- Highlight current state in sound slot simulator.
- Fixed problems with 'changed' state.
- Improved compatibility with LokSound XL V3.5 (Piko version)
- New Firmware for ScaleTrains Tenderlight and Digital Interior Lighting.
4.4.23
- Fixed a bug where a firmware update could lead to an invalid decoder configuration.
4.4.22
- Fixed a bug that caused an invalid LokSound Select configuration when updating from 4.14.9202 or 4.14.9217.
4.4.21
- Added new RailComPlus locomotive icons (for Mobile Control II).
- Fixed firmware version of LokPilot V3.0 FX.
- Fixed LokPilot V3.0 RailCom settings.
- Added locomotive address to overview sheet.
- Fixed 'Decoder version n/a is not supported' error.
- Automatic project type conversion to target decoder. (Can be disabled at Program settings -> Automatic decoder type conversion).
- Added support for Scale Trains Tender Light.
- Added support for Club car WGye.
- Added support for LokPilot Standard Nano V1.0
LokProgrammer PC-Software for all LokSound 5, LokPilot 5, LokSound V4.0 and older Decoders.
Language: , Date: 08.03.21, Version: 5.1.2.
Microsoft .NET Framework 3.5 SP1 is required. The .NET Framework will be installed automatically if the computer is connected to the internet.Supported decoders
LokSound- LokSound 5
- LokSound 5 MKL
- LokSound 5 micro
- LokSound 5 L
- LokSound 5 XL
- LokSound 5 DCC
- LokSound 5 micro DCC
- LokSound 5 micro DCC Direct
- LokSound 5 L DCC
- LokSound 5 micro E24 DCC
- LokSound 5 micro KATO
- LokSound 5 Fx
- LokSound V4.0
- LokSound V4.0 M4
- LokSound V4.0 M4 OEM
- LokSound micro V4.0
- LokSound XL V4.0
- LokSound L V4.0
- LokSound Select
- LokSound Select direct / micro
- LokSound Select OEM
- LokSound Select L
- LokSound V3.5
- LokSound XL V3.5
- LokSound V3.0 M4
- LokSound micro V3.5
- LokPilot 5
- LokPilot 5 DCC
- LokPilot 5 micro
- LokPilot 5 micro DCC
- LokPilot 5 L
- LokPilot 5 L DCC
- LokPilot 5 Fx
- LokPilot 5 Fx DCC
- LokPilot V4.0
- LokPilot V4.0 DCC
- LokPilot V4.0 PX
- LokPilot V4.0 M4
- LokPilot micro V4.0
- LokPilot micro V4.0 DCC
- LokPilot XL V4.0
- LokPilot Fx V4.0
- LokPilot Standard V1.0
- LokPilot Nano Standard V1.0
- LokPilot Fx Nano V1.0
- LokPilot V3.0
- LokPilot V3.0 DCC
- LokPilot V3.0 M4
- LokPilot V3.0 OEM
- LokPilot micro V3.0
- LokPilot micro V3.0 DCC
- LokPilot XL V3.0
- LokPilot Fx V3.0
- LokPilot Fx micro V3.0
- LokPilot Basic
- LokPilot Basic (LA)
- SwitchPilot 3
- SwitchPilot 3 Plus
- SwitchPilot 3 Servo
- SwitchPilot
- SwitchPilot Servo
- SwitchPilot Servo (MA)
- SwitchPilot Servo (2013)
- SwitchPilot V2.0
- SwitchPilot Servo V2.0
- SignalPilot
- Essential Sound Unit
- Test coach EHG388
- Smoke Unit (Gauge 0, G)
- KM1 Smoke Unit
- ESU digital interior light
- MBW 'Silberling' digital Interior light
- Walthers ML8
- Zeitgeist Models Zugspitzbahn Waggon
- Pullmann n-Car 'Silberling'
5.1.2.
- New Firmware 5.4.132 füo LokSound, und LokPilot 5 Family: Improved slowing down when constant brake mode is enabled. ABC break mode trackvoltage threshhold reduced.
- Motor settings- Presets for Softdrive C-Sinus Motor for LokSound 5 => CV 53 = 255.
- SignalPilot: New Firmware 1.0.5: Turnout numbers from 253 working now. Added new signal aspects for SBB, ÖBB, SNCF, SNCB.
- Write decoder data / Write Sounddata : Added new notification settings in the Program settings to allow notification prior to firmware update.
- Bugfixes: SwitchPilot 2 Servo have been detected as SwitchPilot 3 sometimes. SwitchPilot 3 Family: Current threshold of acknowledge increased => better CV reading accuracy.
5.1.1.
- Support for LokSound 5 Fx, LokPilot 5 Fx, LokPilot 5 Fx DCC, SwitchPilot 3, SwitchPilot 3 Plus, SwitchPilot 3 Servo. New Firmware 5.4.130 for LokSound and LokPilot 5 family: New light effect '16 2/3 Hz Flickering'
5.1.0.
- New firmware 5.3.128 for LokSound 5 and LokPilot 5 decoders: new implemented, improved AC- and DC-Analogmode. Support for SignalPilot (initial release). Bugfix: Soundsimulator no longer crashes if sound schedule is incorrectly. Comments are now also copied to and from Templates
5.0.17.
- New firmware 5.3.126 for LokSound 5 and LokPilot 5 decoders: Fixes Servo issues in combination with ROCO Multimouse systems.
5.0.16.
- New TLS Version so that automatic update will work again from now on. New warning messages if output configuration is wrong. New Firmware 5.3.125 for LokSound 5 and LokPilot 5 Familie: F16-F31 will now also follow RCN212, Section 2.3.7. Significantly improved Analog AC and DC motor control: Much better and smoother running on older motors.
5.0.14.
- Firmware 5.3.122 for LokSound 5 and LokPilot 5 Familie: New light output mode: Digitl coupler Coil#2. Ditch Light type1 now has fade-in and fade-out. Added CV 122 Bit 3 to double the amount of steam chuffs when shunting mode is active. Load dependend sound: The sound schedule's acceleratin is now immediately following 'Optinal / Primary Load'. Bugfix: Output mode 'Fliashing light' did not work properly with Grade crossing. Bugfix: Using Motorola Programming mode, now the correct outputs are flashing. Bugfix: Fixed SUSI-Problem with Brawa locomotives.
5.0.13.
- Firmware 5.3.115 for LokSound 5 and LokPilot 5 family: Fixed bug with grde crossing and flash lights. In Motorola programming, the right function outputs flashing now. Fixed scaleing bug of LokProgrammer Software.
5.0.12.
- Firmware 5.3.113 for LokSound 5 and LokPilot 5 family: Motor current limit added. Special Options - Save function state added. Improved ABC brake section detection. Sound schedule: More transistions per each state. Load simulation: Acceleration and Speed in Soundschedule now follow CV3, CV4 values. New flag 'Speed ignores speedtable' in sound schedule
5.0.11.
- Support for LokPilot 5 family
- LokSound 5: fixed Soundcompiler Bug with or-conditions.
- Firmware 5.1.105 for LokSound 5 and LokPilot 5 family: ZIMO ZACK train numbers.
5.0.10.
- Sound editor: Copy&Paste Bug for logic functions fixed.
- Firmware 5.1.103 for LokSound 5 Family: Fixed a Bug in random functions in soundslots. New CV 245 adds waiting time for automatic coupler sequence
5.0.9.
- Soundsimulator - Actions => Reset Bits of Registers.
- Read and write Decoder data: Optimisation for faster decoder detection.
- Soundeditor: Default Size for Mute and Containers are changed
- Firmware 5.1.101 for LokSound 5 Family: Soundslot Settings: Volume for each soundslot now up to 255 (instead of 128) for more volume. New audio quality 7.812 kHz / 8 Bits. Modified SUSI Support for Brawa locomotives. New light function Brake light: Light will automatically turn on while braking. Optimization for ZIMO HLU operation using Stein and MX9: More reliable detection. RailComPlus and M4 Master Decoder Synchronisation. BEMF: CV116 can have lower values down to 25 now for better control during slow speed. Small jump when stopping eliminated.
5.0.8.
- Read Decoderdata: Values for Servooutput Position B was not shown correctly sometimes.
- Soundeditor: Double comment after opening a Multichannel Steam engine removed. Paste (Ctrl-V) improved performance. New Register 'Current Speed' can be used in sound charts.
- Firmware 5.1.85 for LokSound 5 family: Now you can enable F0, F1 - F30 for control in consist mode. F0 directional also (like NMRA). SUSI exended. Now you can also select SUSI Slave to control LokSound Decoders externally.
5.0.7
- New Firmware 5.0.78 for LoKSound 5 Decoders: Optimized motor control (more silent). Fixed bug when controlling Gauge 1 smoke units (KM-1, Kiss)
5.0.6
- Improved stability when writing LokSound 5 sound data
- New menu Tools - LokProgrammer Device shows the hardware revision of the LokProgrammer used
- New firmware 5.0.73 for LokSound 5 decoders: Now automatic detection with Märklin Central Station 3 and 32 functions works again. Registration on Mobile Station 1 works again. Drivestop available in Soundslot 1 and Soundslot 2 now
5.0.5
- New Firmware 5.0.71 for LokSound 5 decoders: New light effect 'Servo Power Control'. Bugfix: Constant brake distance did not work on speedstep 0. CV 23 and CV 24 adjustment did not work correctly.
- Sound simulator: Sometimes did not reproduce 'immediate/cross' transitions.
- Sound simulator: Did hang sometimes on low performance computers. Fixed
- Bugbix: When replacing sound files sometimes the volume settings were lost.
5.0.4
- new firmware 5.0.67 for LokSound 5 Family: Soundslot 1 and Soundslot 2 determine if the driving sound is on for Random sounds. LokSound 5 DCC Decoders now get back the 3-point speed control using CV 2, CV 6 and CV 6.
- LokSound 5 family: Sound compiler sometimes left a state without sound sample too early occasionally.
5.0.3
- New Firmware 5.0.65 for LokSound 5 family: Fixed issue with Motorola address 2-4. Fixed SUSI idle level.
- LokSound 5 Family: Improved Sound compiler: Code size reduction
- Decoder 'Measurement car EHG388 M4': Default values added.
5.0.2
- Fixed a but that ScaleTrains locomotives with LokSound 5 DCC have been reported as 'restricted'.
- New Firmware 5.0.63 for LokSound 5 decoders: Added CV 135 to define the fade-in and fade-out time for the soundfader.
- Added CV 23 and CV 24 (Acceleration and Deceleration adjustment) for NCE systems.
- Fixed a bug that the brightness of function outputs is not correct after conversion from V4. Please reopen your V5 files and check the brightness of all function outputs if ok now!
5.0.1
- New Firmware 5.0.60 for LokSound 5 decoders: Brake function 1-3 new settings. CV 113 time doubled. New logical function 'Acceleration/Deceleration off'. Added CV 255.
5.0.0
- Support for the LokSound 5 Decoder family. Converter for conversion from LokSound 4 to LokSound 5 Decoders. See support pages for more details on these features.
- Multiple bug fixes in the sound editor
- Notification sound: If enabled, a sound can be played to indicate completion of sound writing.
- Sound simulator: Timer accuracy increased
- Virtual Drivers cab: New function buttons F29 to F32. Colours changed to better show the enabled functions.
- Refer to the release notes that is included in the zip-file for more details.
4.7.2
- Added new firmware 4.17.9249 for all LokSound V4 decoders. Now, if CV 245,Bit 5 is enabled, the steam chuff trigger pulses would be cut into half if Shunting mode is active and the external sensor is used
- Several bugfixes
- Graphical user interface updated for Essential Sound Unit's random functions
4.7.1
- Support for Essential Sound Unit - Changing of CVs and Firmware update 5-0-18 to fix some Consisting issues
- LokSound V4 - Steam (multi-channel), trigger condition not available for existing projects (depending on sound schedule).
- LokSound V4 - State properties -> combo box preset is not displayed with ESU Smoke Unit.
- LokSound V4 - Sound schedules with state transitions without destination can not be saved.
- Soundeditor - Transition settings - condition true / false value default value true.
4.7.0
- LokSound V3.5 family - Soundslot can not be assigned in function mapping.
- LokSound V3 - changed Soundslot name is not displayed or updated in combo box (sounds).
- LokPilot Basic, SwitchPilot - manual CV input is missing.
- LokSound V4 - writing the sound data from an imported LokSound V3 project is not possible.
- LokPilot V3.0 DCC - can not open or import .esu files.
- LokSound V4 - when converting to an M4 project, the checked checkboxes of the Moment column will not be applied.
- LokPilot Nano Standard V1 - writing decoder data is not possible.
- LokSound V4 / LokPilot V4 - writing decoder data with project convert and firmware update is not possible.
- LokSound XL V4.0 - wrong mapping of Soundslots when importing a .esu project.
- After deleting a Soundslot the Soundslot name is not updated in 'Soundslot settings' and combo box (Sounds).
- After import a template the Soundslot name is not updated in 'Soundslot settings' and combo box (Sounds).
- After changing the sound type, a NullReferenceException could occur when editing a state in the sound schedule.
- New Firmware Version 4.16.9248 for LokSound Micro V4, LokSound Select direct / micro:
- Bugfix in SUSI-Support
4.6.2
- New Decoder: Walthers ML8
- New Firmware 4.16.9247 for all LokSound V4 , LokPilot V4 and LokSound Select decoders: New CV 179 determines the dceleration value that is used whn the logical function 'Dynamic Brake' is active. This allows for real braking of the locomotive now
- New Firmware 1.2.1415 for LokPilot Standard and LokPilot Nano: Bugfix: CV 4 was not followed when the 'Virtual Drive Sound' was active
4.6.1
- General bugfix release
4.6.0
- New design for Sound simulator. Displays additional internal information during simulation
4.5.3
- New Firmware for LokSound V4, LokPilot V4: 4.15.9246, LokPilot Standard: 1.2.1408 and Digital Interior Lighting: 1.0.1461.
- Consist control command via broadcast.
- 'Drive Hold' function for LokPilot decoders.
- Fixed invalid display of LokSound V3.5 sound slots in the function mapping.
- Support for Bachmann MK2F.
- Soundslot preview did not work for all sound slots on LokSound Select.
- Fixed display issues when using custom scaling / large font.
- Fixed sound write issues with newer LokSound V4.0 decoders.
4.5.2
- Manual CV Input has been showed on decoders without CVs.
- Some LokSound V3.0 M4 files opened conversion dialog instead of loading the project.
- Firmware Version 1.0.1460 for MBW Silberling.
- Disable virtual driver's cab and read write CVs during programming.
- Name of sound slot 2 has not shown correctly oon LokSound Select steam projects.
- Fixed keyboard shortcut behavior of momentary functions in the virtual drivers cab.
- LokPilot Nano FX firmware 1.2.1407: Support for Motorola protocol.
- Club car WGye Firmware 4.15.9243: Save current volume.
- Adjusted bulletin formatting for long description text.
4.5.1
- Output mode Roco coupler was missing on LokPilot V4.0 DCC.
- Firmware Version 1.2.1405 for LokPilot Standard Nano and LokPilot Standard Nano Fx.
4.5.0
- Virtual command station uses momentary function settings from the current project.
- Added sound selection CV to sound slot settings.
- Fixed sound slot previrew for LokSound Select.
- Added snap to grid function to sound schedule editor.
- Added comments to sound schedule editor.
- Start- and end state size is now changable.
- Paste in sound schedule is now aware of the current scroll position.
- Added flash size to extended decoder information.
- Could not open .esux files of non-updateable decoders.
- LokSound Firmware 4.15.9240: Added Heavy Load and Coast mode.
4.4.24
- Improved sound slot and phyisical output configuration user interface.
- Display function icons of the current project to virtual command station.
- Highlight current state in sound slot simulator.
- Fixed problems with 'changed' state.
- Improved compatibility with LokSound XL V3.5 (Piko version)
- New Firmware for ScaleTrains Tenderlight and Digital Interior Lighting.
4.4.23
- Fixed a bug where a firmware update could lead to an invalid decoder configuration.
4.4.22
- Fixed a bug that caused an invalid LokSound Select configuration when updating from 4.14.9202 or 4.14.9217.
4.4.21
- Added new RailComPlus locomotive icons (for Mobile Control II).
- Fixed firmware version of LokPilot V3.0 FX.
- Fixed LokPilot V3.0 RailCom settings.
- Added locomotive address to overview sheet.
- Fixed 'Decoder version n/a is not supported' error.
- Automatic project type conversion to target decoder. (Can be disabled at Program settings -> Automatic decoder type conversion).
- Added support for Scale Trains Tender Light.
- Added support for Club car WGye.
- Added support for LokPilot Standard Nano V1.0
LokProgrammer PC-Software for all LokSound 5, LokPilot 5, LokSound V4.0 and older Decoders.
Language: , Date: 29.01.21, Version: 5.1.1.
Microsoft .NET Framework 3.5 SP1 is required. The .NET Framework will be installed automatically if the computer is connected to the internet.Supported decoders
LokSound- LokSound 5
- LokSound 5 MKL
- LokSound 5 micro
- LokSound 5 L
- LokSound 5 XL
- LokSound 5 DCC
- LokSound 5 micro DCC
- LokSound 5 micro DCC Direct
- LokSound 5 L DCC
- LokSound 5 micro E24 DCC
- LokSound 5 micro KATO
- LokSound 5 Fx
- LokSound V4.0
- LokSound V4.0 M4
- LokSound V4.0 M4 OEM
- LokSound micro V4.0
- LokSound XL V4.0
- LokSound L V4.0
- LokSound Select
- LokSound Select direct / micro
- LokSound Select OEM
- LokSound Select L
- LokSound V3.5
- LokSound XL V3.5
- LokSound V3.0 M4
- LokSound micro V3.5
- LokPilot 5
- LokPilot 5 DCC
- LokPilot 5 micro
- LokPilot 5 micro DCC
- LokPilot 5 L
- LokPilot 5 L DCC
- LokPilot 5 Fx
- LokPilot 5 Fx DCC
- LokPilot V4.0
- LokPilot V4.0 DCC
- LokPilot V4.0 PX
- LokPilot V4.0 M4
- LokPilot micro V4.0
- LokPilot micro V4.0 DCC
- LokPilot XL V4.0
- LokPilot Fx V4.0
- LokPilot Standard V1.0
- LokPilot Nano Standard V1.0
- LokPilot Fx Nano V1.0
- LokPilot V3.0
- LokPilot V3.0 DCC
- LokPilot V3.0 M4
- LokPilot V3.0 OEM
- LokPilot micro V3.0
- LokPilot micro V3.0 DCC
- LokPilot XL V3.0
- LokPilot Fx V3.0
- LokPilot Fx micro V3.0
- LokPilot Basic
- LokPilot Basic (LA)
- SwitchPilot 3
- SwitchPilot 3 Plus
- SwitchPilot 3 Servo
- SwitchPilot
- SwitchPilot Servo
- SwitchPilot Servo (MA)
- SwitchPilot Servo (2013)
- SwitchPilot V2.0
- SwitchPilot Servo V2.0
- SignalPilot
- Essential Sound Unit
- Test coach EHG388
- Smoke Unit (Gauge 0, G)
- KM1 Smoke Unit
- ESU digital interior light
- MBW 'Silberling' digital Interior light
- Walthers ML8
- Zeitgeist Models Zugspitzbahn Waggon
- Pullmann n-Car 'Silberling'
5.1.1.
- Support for LokSound 5 Fx, LokPilot 5 Fx, LokPilot 5 Fx DCC, SwitchPilot 3, SwitchPilot 3 Plus, SwitchPilot 3 Servo. New Firmware 5.4.130 for LokSound and LokPilot 5 family: New light effect '16 2/3 Hz Flickering'
5.1.0.
- New firmware 5.3.128 for LokSound 5 and LokPilot 5 decoders: new implemented, improved AC- and DC-Analogmode. Support for SignalPilot (initial release). Bugfix: Soundsimulator no longer crashes if sound schedule is incorrectly. Comments are now also copied to and from Templates
5.0.17.
- New firmware 5.3.126 for LokSound 5 and LokPilot 5 decoders: Fixes Servo issues in combination with ROCO Multimouse systems.
5.0.16.
- New TLS Version so that automatic update will work again from now on. New warning messages if output configuration is wrong. New Firmware 5.3.125 for LokSound 5 and LokPilot 5 Familie: F16-F31 will now also follow RCN212, Section 2.3.7. Significantly improved Analog AC and DC motor control: Much better and smoother running on older motors.
5.0.14.
- Firmware 5.3.122 for LokSound 5 and LokPilot 5 Familie: New light output mode: Digitl coupler Coil#2. Ditch Light type1 now has fade-in and fade-out. Added CV 122 Bit 3 to double the amount of steam chuffs when shunting mode is active. Load dependend sound: The sound schedule's acceleratin is now immediately following 'Optinal / Primary Load'. Bugfix: Output mode 'Fliashing light' did not work properly with Grade crossing. Bugfix: Using Motorola Programming mode, now the correct outputs are flashing. Bugfix: Fixed SUSI-Problem with Brawa locomotives.
5.0.13.
- Firmware 5.3.115 for LokSound 5 and LokPilot 5 family: Fixed bug with grde crossing and flash lights. In Motorola programming, the right function outputs flashing now. Fixed scaleing bug of LokProgrammer Software.
5.0.12.
- Firmware 5.3.113 for LokSound 5 and LokPilot 5 family: Motor current limit added. Special Options - Save function state added. Improved ABC brake section detection. Sound schedule: More transistions per each state. Load simulation: Acceleration and Speed in Soundschedule now follow CV3, CV4 values. New flag 'Speed ignores speedtable' in sound schedule
5.0.11.
- Support for LokPilot 5 family
- LokSound 5: fixed Soundcompiler Bug with or-conditions.
- Firmware 5.1.105 for LokSound 5 and LokPilot 5 family: ZIMO ZACK train numbers.
5.0.10.
- Sound editor: Copy&Paste Bug for logic functions fixed.
- Firmware 5.1.103 for LokSound 5 Family: Fixed a Bug in random functions in soundslots. New CV 245 adds waiting time for automatic coupler sequence
5.0.9.
- Soundsimulator - Actions => Reset Bits of Registers.
- Read and write Decoder data: Optimisation for faster decoder detection.
- Soundeditor: Default Size for Mute and Containers are changed
- Firmware 5.1.101 for LokSound 5 Family: Soundslot Settings: Volume for each soundslot now up to 255 (instead of 128) for more volume. New audio quality 7.812 kHz / 8 Bits. Modified SUSI Support for Brawa locomotives. New light function Brake light: Light will automatically turn on while braking. Optimization for ZIMO HLU operation using Stein and MX9: More reliable detection. RailComPlus and M4 Master Decoder Synchronisation. BEMF: CV116 can have lower values down to 25 now for better control during slow speed. Small jump when stopping eliminated.
5.0.8.
- Read Decoderdata: Values for Servooutput Position B was not shown correctly sometimes.
- Soundeditor: Double comment after opening a Multichannel Steam engine removed. Paste (Ctrl-V) improved performance. New Register 'Current Speed' can be used in sound charts.
- Firmware 5.1.85 for LokSound 5 family: Now you can enable F0, F1 - F30 for control in consist mode. F0 directional also (like NMRA). SUSI exended. Now you can also select SUSI Slave to control LokSound Decoders externally.
5.0.7
- New Firmware 5.0.78 for LoKSound 5 Decoders: Optimized motor control (more silent). Fixed bug when controlling Gauge 1 smoke units (KM-1, Kiss)
5.0.6
- Improved stability when writing LokSound 5 sound data
- New menu Tools - LokProgrammer Device shows the hardware revision of the LokProgrammer used
- New firmware 5.0.73 for LokSound 5 decoders: Now automatic detection with Märklin Central Station 3 and 32 functions works again. Registration on Mobile Station 1 works again. Drivestop available in Soundslot 1 and Soundslot 2 now
5.0.5
- New Firmware 5.0.71 for LokSound 5 decoders: New light effect 'Servo Power Control'. Bugfix: Constant brake distance did not work on speedstep 0. CV 23 and CV 24 adjustment did not work correctly.
- Sound simulator: Sometimes did not reproduce 'immediate/cross' transitions.
- Sound simulator: Did hang sometimes on low performance computers. Fixed
- Bugbix: When replacing sound files sometimes the volume settings were lost.
5.0.4
- new firmware 5.0.67 for LokSound 5 Family: Soundslot 1 and Soundslot 2 determine if the driving sound is on for Random sounds. LokSound 5 DCC Decoders now get back the 3-point speed control using CV 2, CV 6 and CV 6.
- LokSound 5 family: Sound compiler sometimes left a state without sound sample too early occasionally.
5.0.3
- New Firmware 5.0.65 for LokSound 5 family: Fixed issue with Motorola address 2-4. Fixed SUSI idle level.
- LokSound 5 Family: Improved Sound compiler: Code size reduction
- Decoder 'Measurement car EHG388 M4': Default values added.
5.0.2
- Fixed a but that ScaleTrains locomotives with LokSound 5 DCC have been reported as 'restricted'.
- New Firmware 5.0.63 for LokSound 5 decoders: Added CV 135 to define the fade-in and fade-out time for the soundfader.
- Added CV 23 and CV 24 (Acceleration and Deceleration adjustment) for NCE systems.
- Fixed a bug that the brightness of function outputs is not correct after conversion from V4. Please reopen your V5 files and check the brightness of all function outputs if ok now!
5.0.1
- New Firmware 5.0.60 for LokSound 5 decoders: Brake function 1-3 new settings. CV 113 time doubled. New logical function 'Acceleration/Deceleration off'. Added CV 255.
5.0.0
- Support for the LokSound 5 Decoder family. Converter for conversion from LokSound 4 to LokSound 5 Decoders. See support pages for more details on these features.
- Multiple bug fixes in the sound editor
- Notification sound: If enabled, a sound can be played to indicate completion of sound writing.
- Sound simulator: Timer accuracy increased
- Virtual Drivers cab: New function buttons F29 to F32. Colours changed to better show the enabled functions.
- Refer to the release notes that is included in the zip-file for more details.
4.7.2
- Added new firmware 4.17.9249 for all LokSound V4 decoders. Now, if CV 245,Bit 5 is enabled, the steam chuff trigger pulses would be cut into half if Shunting mode is active and the external sensor is used
- Several bugfixes
- Graphical user interface updated for Essential Sound Unit's random functions
4.7.1
- Support for Essential Sound Unit - Changing of CVs and Firmware update 5-0-18 to fix some Consisting issues
- LokSound V4 - Steam (multi-channel), trigger condition not available for existing projects (depending on sound schedule).
- LokSound V4 - State properties -> combo box preset is not displayed with ESU Smoke Unit.
- LokSound V4 - Sound schedules with state transitions without destination can not be saved.
- Soundeditor - Transition settings - condition true / false value default value true.
4.7.0
- LokSound V3.5 family - Soundslot can not be assigned in function mapping.
- LokSound V3 - changed Soundslot name is not displayed or updated in combo box (sounds).
- LokPilot Basic, SwitchPilot - manual CV input is missing.
- LokSound V4 - writing the sound data from an imported LokSound V3 project is not possible.
- LokPilot V3.0 DCC - can not open or import .esu files.
- LokSound V4 - when converting to an M4 project, the checked checkboxes of the Moment column will not be applied.
- LokPilot Nano Standard V1 - writing decoder data is not possible.
- LokSound V4 / LokPilot V4 - writing decoder data with project convert and firmware update is not possible.
- LokSound XL V4.0 - wrong mapping of Soundslots when importing a .esu project.
- After deleting a Soundslot the Soundslot name is not updated in 'Soundslot settings' and combo box (Sounds).
- After import a template the Soundslot name is not updated in 'Soundslot settings' and combo box (Sounds).
- After changing the sound type, a NullReferenceException could occur when editing a state in the sound schedule.
- New Firmware Version 4.16.9248 for LokSound Micro V4, LokSound Select direct / micro:
- Bugfix in SUSI-Support
4.6.2
- New Decoder: Walthers ML8
- New Firmware 4.16.9247 for all LokSound V4 , LokPilot V4 and LokSound Select decoders: New CV 179 determines the dceleration value that is used whn the logical function 'Dynamic Brake' is active. This allows for real braking of the locomotive now
- New Firmware 1.2.1415 for LokPilot Standard and LokPilot Nano: Bugfix: CV 4 was not followed when the 'Virtual Drive Sound' was active
4.6.1
- General bugfix release
4.6.0
- New design for Sound simulator. Displays additional internal information during simulation
4.5.3
- New Firmware for LokSound V4, LokPilot V4: 4.15.9246, LokPilot Standard: 1.2.1408 and Digital Interior Lighting: 1.0.1461.
- Consist control command via broadcast.
- 'Drive Hold' function for LokPilot decoders.
- Fixed invalid display of LokSound V3.5 sound slots in the function mapping.
- Support for Bachmann MK2F.
- Soundslot preview did not work for all sound slots on LokSound Select.
- Fixed display issues when using custom scaling / large font.
- Fixed sound write issues with newer LokSound V4.0 decoders.
4.5.2
- Manual CV Input has been showed on decoders without CVs.
- Some LokSound V3.0 M4 files opened conversion dialog instead of loading the project.
- Firmware Version 1.0.1460 for MBW Silberling.
- Disable virtual driver's cab and read write CVs during programming.
- Name of sound slot 2 has not shown correctly oon LokSound Select steam projects.
- Fixed keyboard shortcut behavior of momentary functions in the virtual drivers cab.
- LokPilot Nano FX firmware 1.2.1407: Support for Motorola protocol.
- Club car WGye Firmware 4.15.9243: Save current volume.
- Adjusted bulletin formatting for long description text.
4.5.1
- Output mode Roco coupler was missing on LokPilot V4.0 DCC.
- Firmware Version 1.2.1405 for LokPilot Standard Nano and LokPilot Standard Nano Fx.
4.5.0
- Virtual command station uses momentary function settings from the current project.
- Added sound selection CV to sound slot settings.
- Fixed sound slot previrew for LokSound Select.
- Added snap to grid function to sound schedule editor.
- Added comments to sound schedule editor.
- Start- and end state size is now changable.
- Paste in sound schedule is now aware of the current scroll position.
- Added flash size to extended decoder information.
- Could not open .esux files of non-updateable decoders.
- LokSound Firmware 4.15.9240: Added Heavy Load and Coast mode.
4.4.24
- Improved sound slot and phyisical output configuration user interface.
- Display function icons of the current project to virtual command station.
- Highlight current state in sound slot simulator.
- Fixed problems with 'changed' state.
- Improved compatibility with LokSound XL V3.5 (Piko version)
- New Firmware for ScaleTrains Tenderlight and Digital Interior Lighting.
4.4.23
- Fixed a bug where a firmware update could lead to an invalid decoder configuration.
4.4.22
- Fixed a bug that caused an invalid LokSound Select configuration when updating from 4.14.9202 or 4.14.9217.
4.4.21
- Added new RailComPlus locomotive icons (for Mobile Control II).
- Fixed firmware version of LokPilot V3.0 FX.
- Fixed LokPilot V3.0 RailCom settings.
- Added locomotive address to overview sheet.
- Fixed 'Decoder version n/a is not supported' error.
- Automatic project type conversion to target decoder. (Can be disabled at Program settings -> Automatic decoder type conversion).
- Added support for Scale Trains Tender Light.
- Added support for Club car WGye.
- Added support for LokPilot Standard Nano V1.0
LokProgrammer PC-Software for 4th generation decoders
Language: , Date: 27.07.18, Version: 4.7.2.
Microsoft .NET Framework 3.5 SP1 is required. The .NET Framework will be installed automatically if the computer is connected to the internet.Supported decoders
LokSound- LokSound V4.0
- LokSound V4.0 M4
- LokSound V4.0 M4 OEM
- LokSound micro V4.0
- LokSound XL V4.0
- LokSound L V4.0
- LokSound Select
- LokSound Select direct / micro
- LokSound Select OEM
- LokSound Select L
- LokSound V3.5
- LokSound XL V3.5
- LokSound V3.0 M4
- LokSound micro V3.5
- LokPilot V4.0
- LokPilot V4.0 DCC
- LokPilot V4.0 PX
- LokPilot V4.0 M4
- LokPilot micro V4.0
- LokPilot micro V4.0 DCC
- LokPilot XL V4.0
- LokPilot Fx V4.0
- LokPilot Standard V1.0
- LokPilot Nano Standard V1.0
- LokPilot Fx Nano V1.0
- LokPilot V3.0
- LokPilot V3.0 DCC
- LokPilot V3.0 M4
- LokPilot V3.0 OEM
- LokPilot micro V3.0
- LokPilot micro V3.0 DCC
- LokPilot XL V3.0
- LokPilot Fx V3.0
- LokPilot Fx micro V3.0
- LokPilot Basic
- LokPilot Basic (LA)
- SwitchPilot
- SwitchPilot Servo
- SwitchPilot Servo (MA)
- SwitchPilot Servo (2013)
- SwitchPilot V2.0
- SwitchPilot Servo V2.0
- Essential Sound Unit
- Test coach EHG388
- Smoke Unit (Gauge 0, G)
- KM1 Smoke Unit
- ESU digital interior light
- MBW 'Silberling' digital Interior light
- Walthers ML8
4.7.2
- Added new firmware 4.17.9249 for all LokSound V4 decoders. Now, if CV 245,Bit 5 is enabled, the steam chuff trigger pulses would be cut into half if Shunting mode is active and the external sensor is used
- Several bugfixes
- Graphical user interface updated for Essential Sound Unit's random functions
4.7.1
- Support for Essential Sound Unit - Changing of CVs and Firmware update 5-0-18 to fix some Consisting issues
- LokSound V4 - Steam (multi-channel), trigger condition not available for existing projects (depending on sound schedule).
- LokSound V4 - State properties -> combo box preset is not displayed with ESU Smoke Unit.
- LokSound V4 - Sound schedules with state transitions without destination can not be saved.
- Soundeditor - Transition settings - condition true / false value default value true.
4.7.0
- LokSound V3.5 family - Soundslot can not be assigned in function mapping.
- LokSound V3 - changed Soundslot name is not displayed or updated in combo box (sounds).
- LokPilot Basic, SwitchPilot - manual CV input is missing.
- LokSound V4 - writing the sound data from an imported LokSound V3 project is not possible.
- LokPilot V3.0 DCC - can not open or import .esu files.
- LokSound V4 - when converting to an M4 project, the checked checkboxes of the Moment column will not be applied.
- LokPilot Nano Standard V1 - writing decoder data is not possible.
- LokSound V4 / LokPilot V4 - writing decoder data with project convert and firmware update is not possible.
- LokSound XL V4.0 - wrong mapping of Soundslots when importing a .esu project.
- After deleting a Soundslot the Soundslot name is not updated in 'Soundslot settings' and combo box (Sounds).
- After import a template the Soundslot name is not updated in 'Soundslot settings' and combo box (Sounds).
- After changing the sound type, a NullReferenceException could occur when editing a state in the sound schedule.
- New Firmware Version 4.16.9248 for LokSound Micro V4, LokSound Select direct / micro:
- Bugfix in SUSI-Support
4.6.2
- New Decoder: Walthers ML8
- New Firmware 4.16.9247 for all LokSound V4 , LokPilot V4 and LokSound Select decoders: New CV 179 determines the dceleration value that is used whn the logical function 'Dynamic Brake' is active. This allows for real braking of the locomotive now
- New Firmware 1.2.1415 for LokPilot Standard and LokPilot Nano: Bugfix: CV 4 was not followed when the 'Virtual Drive Sound' was active
4.6.1
- General bugfix release
4.6.0
- New design for Sound simulator. Displays additional internal information during simulation
4.5.3
- New Firmware for LokSound V4, LokPilot V4: 4.15.9246, LokPilot Standard: 1.2.1408 and Digital Interior Lighting: 1.0.1461.
- Consist control command via broadcast.
- 'Drive Hold' function for LokPilot decoders.
- Fixed invalid display of LokSound V3.5 sound slots in the function mapping.
- Support for Bachmann MK2F.
- Soundslot preview did not work for all sound slots on LokSound Select.
- Fixed display issues when using custom scaling / large font.
- Fixed sound write issues with newer LokSound V4.0 decoders.
4.5.2
- Manual CV Input has been showed on decoders without CVs.
- Some LokSound V3.0 M4 files opened conversion dialog instead of loading the project.
- Firmware Version 1.0.1460 for MBW Silberling.
- Disable virtual driver's cab and read write CVs during programming.
- Name of sound slot 2 has not shown correctly oon LokSound Select steam projects.
- Fixed keyboard shortcut behavior of momentary functions in the virtual drivers cab.
- LokPilot Nano FX firmware 1.2.1407: Support for Motorola protocol.
- Club car WGye Firmware 4.15.9243: Save current volume.
- Adjusted bulletin formatting for long description text.
4.5.1
- Output mode Roco coupler was missing on LokPilot V4.0 DCC.
- Firmware Version 1.2.1405 for LokPilot Standard Nano and LokPilot Standard Nano Fx.
4.5.0
- Virtual command station uses momentary function settings from the current project.
- Added sound selection CV to sound slot settings.
- Fixed sound slot previrew for LokSound Select.
- Added snap to grid function to sound schedule editor.
- Added comments to sound schedule editor.
- Start- and end state size is now changable.
- Paste in sound schedule is now aware of the current scroll position.
- Added flash size to extended decoder information.
- Could not open .esux files of non-updateable decoders.
- LokSound Firmware 4.15.9240: Added Heavy Load and Coast mode.
4.4.24
- Improved sound slot and phyisical output configuration user interface.
- Display function icons of the current project to virtual command station.
- Highlight current state in sound slot simulator.
- Fixed problems with 'changed' state.
- Improved compatibility with LokSound XL V3.5 (Piko version)
- New Firmware for ScaleTrains Tenderlight and Digital Interior Lighting.
4.4.23
- Fixed a bug where a firmware update could lead to an invalid decoder configuration.
4.4.22
- Fixed a bug that caused an invalid LokSound Select configuration when updating from 4.14.9202 or 4.14.9217.
4.4.21
- Added new RailComPlus locomotive icons (for Mobile Control II).
- Fixed firmware version of LokPilot V3.0 FX.
- Fixed LokPilot V3.0 RailCom settings.
- Added locomotive address to overview sheet.
- Fixed 'Decoder version n/a is not supported' error.
- Automatic project type conversion to target decoder. (Can be disabled at Program settings -> Automatic decoder type conversion).
- Added support for Scale Trains Tender Light.
- Added support for Club car WGye.
- Added support for LokPilot Standard Nano V1.0
LokProgrammer PC-Software
Apowersoft screen recorder no sound android. Language: , Date: 13.09.11, Version: 2.7.9
Supported decoders:
LokPilot / LokPilotXL
LokPilotDCC / LokPilotXL DCC
LokPilot M4
LokPilot micro
LokPilot Basic
LokPilot V2.0 / LokPilotDCC V2.0
LokPilot V3.0 / LokPilotDCC V3.0
LokPilot ROCO
LokPilot V3.0 OEM
LokPilot V3.0 'Trix' LokSound2
LokSound3
LokSound V3.5
LokSound V3.5 'Trix'
LokSound micro
LokSoundXL V1.2
LokSoundXL V2.0
LokSoundXL V2.1
LokSoundXL V3.0
LokSound V3.0 M4 LokSoundXL V3.0 M4
mfx Sounddecoder von Märklin
mfx Sounddecoder XL von Märklin
SwitchPilot SwitchPilot Servo
LokSound Template Pack
J-R Programmer: Install Drivers In Windows 10 - YouTube
Sound library for LokProgrammer 4.4.24 or newer
Language: , Date: 20.09.17, Version: 1.9
Install this collection of sounds, if you want to add further whistles, horns, bells, station announcements or other sounds to the soundprojects we offer. The LokSound Template Pack includes most of the ESU sounds in a easy to use manner. The LokSound Template Pack works for all LokSound V4.0 decoders in combination with the LokProgrammer software from version 4.2.24.
St Link V2 Programmer
USB Driver
Jr Programmer V2 Download
Drivers Jr Programmer V2 Updated
USB driver for Windows XP
Language: , Date: 12.04.10, Version: 1.1.0
Windows XP driver for the adapter cable shipped with the LokSound Programmer 53450.USB driver for FDTI Chipset and Windows XP / Vista / 7 / 8
Language: , Date: 07.12.12, Version: 1.1.0
Windows XP / Vista / 7 driver for the adapter cable shipped with the LokSound Programmer 53451. This Driver is for cable with FDTI chipset only. Usually, you don't Need this Driver for Windows 7 or Windows 8 (please try to use the built-in Driver), but if you find Problems you should install this one. Please REMOVE the cable from the Computer Prior to Installation. Also, you will Need Admin rights on your computer to install.
This license agreement ('the Agreement') is a legal agreement between you and ESU, LLC ('ESU') for the sound samples ('Sound Samples') and software licensed from this internet site ('Content') as well as other content owned by ESU and its third party licensors that also includes images, mixes and documentation. By installing or using the Content, you are agreeing to be bound by the terms of this Agreement. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU ARE GRANTED NO RIGHTS IN RESPECT OF THE CONTENT AND MUST PROMPTLY DELETE THE CONTENT YOU HAVE INSTALLED.
1. GRANT OF LICENSE
1.1 ESU grants you a non-transferable, limited, non-exclusive right to use the Content solely for your own personal purposes. You may load the Content into RAM, as well as installation on a hard disk or other storage device on a single computer, hardware product or mobile device owned by you or under your control. The installation process may result in a copy of the Content residing on your computer, in which case, you may retain one (1) copy of the Content on your computer, provided that you retain all copyright and other proprietary notices on the copy and the copy is kept in your possession with the original.
1.2 By using the Content, you shall not obtain any ownership, copyright, proprietary or other interest in or to the Content. The Content is licensed, not sold.
1.3 You are licensed to use, modify and combine the Sound Samples with sound samples provided by third parties, to create your own sound compositions which, subject to you complying with the terms of this Agreement, you are free to distribute as you wish provided that: (i) the Sound Samples have been mixed together to create an original work; (ii) individual Sound Samples are not used in isolation and (iii) the Sound Samples or derivatives are not used to create sound libraries for distribution to third parties.
2. PROHIBITED USES
Neither you, nor anyone at your direction, shall:
2.1 use the Content, or any part of it, for any public performance, live broadcast or time delayed live broadcast where the Content is used unattended for commercial purposes without ESU's prior written consent;
2.2 use the Content, or any part of it, in any competitive product;
2.3 sub-license, copy, reproduce, transmit, assign, rent, sell, lease, offer on a pay-per-play basis, distribute for money or any other consideration, or commercially exploit in any other manner or through any medium whatsoever or otherwise transfer in any way the Content or any part thereof;
2.4 manufacture and/or distribute for money or otherwise commercially exploit any product that incorporates any part of the Content. If you wish to use any part of the Content for manufacture, resale, sub-license or further distribution, you must contact ESU (and where relevant, its licensors) to enter into an appropriate agreement with ESU (and, where relevant, its licensors);
2.5 publish the results of any analysis or comparative evaluation of the Content or any part thereof without ESU's prior written consent;
2.6 reverse engineer, recompile or disassemble any part of the Content except to the extent and in the circumstances expressly permitted by ESU and its licensors in writing or by law;
3. INTELLECTUAL PROPERTY RIGHTS
You acknowledge that all intellectual property rights in the Content are and shall remain vested in ESU and its licensors. You undertake not to interfere with or diminish, whether by act or omission, the rights, title and interest in the Content of ESU and its licensors. You may be held responsible by ESU and/or any of its licensors for any infringement of any intellectual property rights in the Content. For the avoidance of doubt, provided that you comply with the terms of this Agreement, ESU shall not claim ownership of the intellectual property rights in any compositions created by your use of the Content.
4. TERM AND TERMINATION
This Agreement is effective from the first date you install the Content. The rights granted to you under this Agreement shall terminate if you fail to abide by its terms. Upon such termination you agree to destroy the Content including any Content stored on the hard disk of any computer under your control. You may terminate this Agreement at any time by destroying or erasing all your copies of the Content. Any termination of this Agreement (howsoever occasioned) shall not affect any accrued rights or liabilities of you or ESU nor shall it affect the coming into force or the continuance in force of the provisions of Clauses 2, 3, 5 and 6 and any provision hereof which is by implication intended to come into or continue in force on or after such termination.
5. NO WARRANTIES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ESU AND ITS LICENSORS PROVIDE THE CONTENT 'AS IS' AND ESU EXCLUDES ON BEHALF OF ITSELF AND ITS LICENSORS, ALL CONDITIONS, TERMS, REPRESENTATIONS (OTHER THAN FRAUDULENT REPRESENTATIONS) AND WARRANTIES RELATING TO THE CONTENT, WHETHER IMPOSED BY STATUTE OR BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO, IMPLIED WARRANTIES OF SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. NEITHER ESU NOR ITS LICENSORS WARRANT THAT THE OPERATION OF THE CONTENT WILL BE UNINTERRUPTED, ERROR FREE, VIRUS FREE OR MEET YOUR SPECIFIC REQUIREMENTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
6. ESU's LIABILITY
Neither ESU nor its licensors shall have any liability to you for any loss or damage caused directly or indirectly in connection with the Content, any part thereof or this Agreement, except to the extent that such liability cannot be lawfully excluded. In any case, neither ESU nor its licensors shall be liable for any loss of business, data, profits, savings, or any other special, incidental, consequential, indirect or economic loss whatsoever even if such losses were contemplated at the date of this Agreement.
7. GENERAL
7.1 You acknowledge that damages alone might be insufficient remedy for any breach of the terms of this Agreement and that the remedies of injunction, specific performance or other equitable relief would be suitable remedies in the event of any breach or threatened breach of this Agreement.
7.2 You may not assign or otherwise transfer all or any part of this Agreement or the rights granted to you hereunder.
7.3 ESU is not obliged to provide any maintenance, technical support or upgrades to you.
7.4 You agree to comply with all applicable import and export regulations and acknowledge that you have the responsibility for obtaining all necessary licenses to export, re-export, transfer or import the Content.
7.5 This Agreement constitutes the entire agreement between you and ESU with respect to the subject matter hereof and supersedes all prior agreements, arrangements and understandings between the parties and constitutes the entire agreement between the parties relating to such subject matter hereof. No addition to or modification of any provision of this Agreement shall be binding upon ESU and you unless made by a written instrument signed by a duly authorized representative of ESU and you.
7.6 No forbearance, delay or indulgence by either party in enforcing the provisions of this Agreement shall prejudice or restrict the rights of that party nor shall any waiver of its rights operate as a waiver of any subsequent breach and no right, power or remedy herein conferred upon or reserved for either party is exclusive of any other right, power or remedy available to that party and each such right, power or remedy shall be cumulative.
7.7 Notwithstanding that the whole or any part of any provision of this Agreement may prove to be illegal or unenforceable the other provisions of this Agreement and the remainder of the provision in question shall remain in full force and effect.
1. GRANT OF LICENSE
1.1 ESU grants you a non-transferable, limited, non-exclusive right to use the Content solely for your own personal purposes. You may load the Content into RAM, as well as installation on a hard disk or other storage device on a single computer, hardware product or mobile device owned by you or under your control. The installation process may result in a copy of the Content residing on your computer, in which case, you may retain one (1) copy of the Content on your computer, provided that you retain all copyright and other proprietary notices on the copy and the copy is kept in your possession with the original.
1.2 By using the Content, you shall not obtain any ownership, copyright, proprietary or other interest in or to the Content. The Content is licensed, not sold.
1.3 You are licensed to use, modify and combine the Sound Samples with sound samples provided by third parties, to create your own sound compositions which, subject to you complying with the terms of this Agreement, you are free to distribute as you wish provided that: (i) the Sound Samples have been mixed together to create an original work; (ii) individual Sound Samples are not used in isolation and (iii) the Sound Samples or derivatives are not used to create sound libraries for distribution to third parties.
2. PROHIBITED USES
Neither you, nor anyone at your direction, shall:
2.1 use the Content, or any part of it, for any public performance, live broadcast or time delayed live broadcast where the Content is used unattended for commercial purposes without ESU's prior written consent;
2.2 use the Content, or any part of it, in any competitive product;
2.3 sub-license, copy, reproduce, transmit, assign, rent, sell, lease, offer on a pay-per-play basis, distribute for money or any other consideration, or commercially exploit in any other manner or through any medium whatsoever or otherwise transfer in any way the Content or any part thereof;
2.4 manufacture and/or distribute for money or otherwise commercially exploit any product that incorporates any part of the Content. If you wish to use any part of the Content for manufacture, resale, sub-license or further distribution, you must contact ESU (and where relevant, its licensors) to enter into an appropriate agreement with ESU (and, where relevant, its licensors);
2.5 publish the results of any analysis or comparative evaluation of the Content or any part thereof without ESU's prior written consent;
2.6 reverse engineer, recompile or disassemble any part of the Content except to the extent and in the circumstances expressly permitted by ESU and its licensors in writing or by law;
3. INTELLECTUAL PROPERTY RIGHTS
You acknowledge that all intellectual property rights in the Content are and shall remain vested in ESU and its licensors. You undertake not to interfere with or diminish, whether by act or omission, the rights, title and interest in the Content of ESU and its licensors. You may be held responsible by ESU and/or any of its licensors for any infringement of any intellectual property rights in the Content. For the avoidance of doubt, provided that you comply with the terms of this Agreement, ESU shall not claim ownership of the intellectual property rights in any compositions created by your use of the Content.
4. TERM AND TERMINATION
This Agreement is effective from the first date you install the Content. The rights granted to you under this Agreement shall terminate if you fail to abide by its terms. Upon such termination you agree to destroy the Content including any Content stored on the hard disk of any computer under your control. You may terminate this Agreement at any time by destroying or erasing all your copies of the Content. Any termination of this Agreement (howsoever occasioned) shall not affect any accrued rights or liabilities of you or ESU nor shall it affect the coming into force or the continuance in force of the provisions of Clauses 2, 3, 5 and 6 and any provision hereof which is by implication intended to come into or continue in force on or after such termination.
5. NO WARRANTIES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ESU AND ITS LICENSORS PROVIDE THE CONTENT 'AS IS' AND ESU EXCLUDES ON BEHALF OF ITSELF AND ITS LICENSORS, ALL CONDITIONS, TERMS, REPRESENTATIONS (OTHER THAN FRAUDULENT REPRESENTATIONS) AND WARRANTIES RELATING TO THE CONTENT, WHETHER IMPOSED BY STATUTE OR BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO, IMPLIED WARRANTIES OF SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. NEITHER ESU NOR ITS LICENSORS WARRANT THAT THE OPERATION OF THE CONTENT WILL BE UNINTERRUPTED, ERROR FREE, VIRUS FREE OR MEET YOUR SPECIFIC REQUIREMENTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
6. ESU's LIABILITY
Neither ESU nor its licensors shall have any liability to you for any loss or damage caused directly or indirectly in connection with the Content, any part thereof or this Agreement, except to the extent that such liability cannot be lawfully excluded. In any case, neither ESU nor its licensors shall be liable for any loss of business, data, profits, savings, or any other special, incidental, consequential, indirect or economic loss whatsoever even if such losses were contemplated at the date of this Agreement.
7. GENERAL
7.1 You acknowledge that damages alone might be insufficient remedy for any breach of the terms of this Agreement and that the remedies of injunction, specific performance or other equitable relief would be suitable remedies in the event of any breach or threatened breach of this Agreement.
7.2 You may not assign or otherwise transfer all or any part of this Agreement or the rights granted to you hereunder.
7.3 ESU is not obliged to provide any maintenance, technical support or upgrades to you.
7.4 You agree to comply with all applicable import and export regulations and acknowledge that you have the responsibility for obtaining all necessary licenses to export, re-export, transfer or import the Content.
7.5 This Agreement constitutes the entire agreement between you and ESU with respect to the subject matter hereof and supersedes all prior agreements, arrangements and understandings between the parties and constitutes the entire agreement between the parties relating to such subject matter hereof. No addition to or modification of any provision of this Agreement shall be binding upon ESU and you unless made by a written instrument signed by a duly authorized representative of ESU and you.
7.6 No forbearance, delay or indulgence by either party in enforcing the provisions of this Agreement shall prejudice or restrict the rights of that party nor shall any waiver of its rights operate as a waiver of any subsequent breach and no right, power or remedy herein conferred upon or reserved for either party is exclusive of any other right, power or remedy available to that party and each such right, power or remedy shall be cumulative.
7.7 Notwithstanding that the whole or any part of any provision of this Agreement may prove to be illegal or unenforceable the other provisions of this Agreement and the remainder of the provision in question shall remain in full force and effect.